ECT's Intermittent or skip Bonded tubing is a two-tube bonded configuration. The tubes are color-coded to prevent line crossing and make for easier identification. The durable and lightweight properties all make bonded tubing an ideal choice for a wide spectrum of uses including environmental water sampling, well testing, remediation, and monitoring equipment. ECT's Bonded tubing is the leading choice for bladder pump sample tubing. What is a skip-bond? A: The bond between the two tubes runs every other 6". This means there is a 6" gap between the bond lines where no bond has taken place. This reduces the need for separation or splitting back the tubes wherever a cut is needed. by using the skip section of tubing, you ensure a tight seal between compression fittings because there will not be any weld residue in that section. SpecificationsTubing A:Tubing Material: PolyethyleneTubing Type: High Density / HDPETubing Color: NaturalInside Diameter: .17" or 11/64"Outside Diameter: .25" or 1/4"Wall Thickness: .040"Length: 500'Max Pressure: 260 PSI at 72°FTemp Range: -93°F - 184°FHardness, Shore D: 69Tensile Strength: 4,600 PSI Tubing B:Tubing Material: PolyethyleneTubing Type: High Density / HDPETubing Color: BlueInside Diameter: .17" or 11/64"Outside Diameter: .25" or 1/4"Wall Thickness: .040"Length: VariousMax Pressure: 260 PSI at 72°FTemp Range: -93°F - 184°FHardness, Shore D: 69Tensile Strength: 4,600 PSI ApplicationsGroundwater monitoringBladder pump samplingNested vapor linesAir sampling tubesLaboratory applicationsWater processingPFAS and PFOA Testing Approved Note: Additional fractional and metric sizes, custom colors and cut lengths are available and quoted upon request.
